CITIPEL传感器AA015-000产品参数
CITIPEL是CITICEL的注册商标，CITICEL始建于1977年英国伦敦的城市大学，CITICEL现已发展成一个在多个国家拥有400多雇员的国际公司。一直以来CITICEL坚守一个不变的承诺，那就是推动产品质量达到新水平并成为气体传感器性能标准的制定者，从而带领世界各地的仪器制造商获为客户提供最准确、可靠的气体探测解决方案。
主营产品
CITI一氧化碳传感器
CITI二氧化碳传感器
CITI氧传感器
CITIPEL传感器AA015-000产品参数
|
Performance Characteristics
|
|
|
Nominal Range
|
0-2ppm
|
|
Max Overload
|
0-1000ppm
|
|
Expected Operating Life
|
See below
|
|
Output Signal
|
13-17mV in air across a 10Ω load resistor
|
|
T95 Response Time
|
<20 secs
|
|
Temperature Range
|
-20°C to +50°C
|
|
Temperature Coefficient
|
0.2% signal/°C
|
|
Pressure Range
|
Atmospheric±10%
|
|
Operating Humidity
|
0 to 99% RH non-condensing
|
|
Long Term Output Drift
|
<5% signal loss /year
|
|
Linearity
|
Linear
|
|
Purge Time(Ambient air to <10ppm)
|
<6hours
|
|
Storage Life
|
Six months in CTL container
|
|
Recommended Storage Temp.
|
0-20°C
|
|
Warranty Period
|
12 months from date of despatch
|
CITIPEL传感器AA015-000产品介绍
The operating life of a C/NLL Oxygen CiTiceL is inversely proportional to the amount of oxygen the sensor consumes. As City Technology has no knowledge of the operating conditions of any particular application, the company cannot give any guarantee with regard to the life of the sensor. However the following guidelines should be of use:
Under normal operating conditions (i.e. ppm levels) the sensor has a large excess capacity, and there will only be a gradual loss of sensitivity. It is recommended, however, that the sensor is changed every year to maintain the optimum sensitivity.
It is not advisable to use these sensors in ambient air, or to keep them on load in air for long periods. This will considerably decrease the life of the sensor.
C / NLL氧气CiTiceL的使用寿命与传感器消耗的氧气量成反比。由于City Technology不了解任何特定应用的操作条件，因此公司无法对传感器的使用寿命提供任何保证。 但是，应使用以下准则：
在正常操作条件下（即ppm级），传感器具有很大的过剩容量，并且只会逐渐失去灵敏度。 但是，建议每年更换传感器以保持最佳灵敏度。
建议不要在环境空气中使用这些传感器，或者长时间将其保持在空气中。这将大大减少传感器的使用寿命。
外观尺寸
CITIPEL传感器其他常见型号：
CITIPEL AAW85-07WA-CIT
CITIPEL AA625-180
CITIPEL AA625-230
CITIPEL AA015-000