SENSORTHERM高温计SS09 0550 1400 112 531-B产品介绍

德国SENSORTHERM开发，生产和分配智能和复杂的红外测量技术。30多年来，针对特定目标群体量身定制的测量仪器和软件应用程序已实现了客户要求和特殊要求。SENSORTHERM高温计的特点是全数字结构。这样可确保以高精度实现高测量速度和信号输出（响应时间）。

SENSORTHERM的主营产品有高温计，高速高温计，温度控制器高温计（PID控制器），高温计优化的PID程序控制器，红外开关（铁水探测器），红外热像仪，线扫描仪，校准源和设备专用配件等。

SENSORTHERM高温计SS09技术参数

Technical Data
Model	SS09
Temperature ranges	550 – 1400°C 650 – 1800°C
Temp. sub ranges	Any temperature sub-range adjustable within the temperature range (minimum span 50°C)
Spectral range	0.7–1.1 µm
Detector	Silicon
Response time t90	5 ms, adjustable up to 10 s
Exposure time	2.5 ms
Uncertainty	0.5% of reading in °C + 1°C
Repeatability	0.1% of reading in °C + 1 K
Emissivity ε	20–100%
Analog output	0/4–20 mA, switchable, isolated, max. load: 500 Ω.
Serial interface	Optional RS232 or RS485 (addressable), baud rate 1.2 up to 57.6 kBd, Resolution 0.1°C
Peak picker	Automatic hold mode or manual time settings to clear (reset)
Parameter settings	Via serial interface and PC software SensorTools or via self-compiled communication program: Emissivity, temperature sub range, settings for peak picker, device address (with RS485), baud rate,response time, selecting analog output 0/4–20 mA.
Power requirement	24 V DC (12–30 V DC), max. 1 VA
Isolation	Voltage supply, analog output and serial interface are galvanically isolated from each other
Sighting	Laser targeting light (red, λ=650 nm, P< 1 mW, class II to IEC 60825-1)
Ambient temperature	0–70°C (The laser targeting light is deactivated at a device temperature from 60°C to prevent its overheating)
Storage temperature	-20–85°C
Relative humidity	No condensing conditions
Housing / protection class	Stainless steel, IP65 to DIN 40 050 with connector
Weight	650 g
CE label	According to EU directives for electromagnetic immunity