LOCK SAFE电池隔离器装置LS13007-01介绍

LOCK SAFE工业安全设备是在澳大利亚专门设计和制造的。Locksafe提供全面的有效且易于使用的正锁定能量固定和/或中断安全兼容的锁定产品。专门针对业务严苛，多样化的澳大利亚和全球采矿与建筑行业。

LOCK SAFE产品有：

外壳

搭扣

隔离柜

锁定支架

挂锁和存储

开关

开关和支架

阀门锁定

LOCK SAFE电池隔离器装置LS13007-01描述

Locksafe锁定支架和Bosch开关–电池隔离器组件。

该锁定支架设计为适合Bosch（或Hella）开关，该开关可使开关锁定在断开位置。

这样可以保护人员和车辆免于未经授权的启动。

支架尺寸为140mm x 80mm x 90mm。

所有锁定支架主要为不锈钢，并涂有粉末涂料以进行识别。

所有锁定支架均设计为适合交换机，而无需卸下交换机和电缆。

安装后，它将永久保持在原位，并且只能锁定在OFF位置。

对于电池隔离，请使用红色（-01）

对于启动器隔离，请使用黄色（-02）

通常通过面板安装，因此电缆和开关在面板后面被堵住.Locksafe对此开关有一些安装选项。

开关额定为2500安的间歇性和24伏直流时为250连续。

Locksafe locking bracket and Bosch switch – battery isolator assembly.

This locking bracket is designed to suit a Bosch (or Hella) switch, which enables the switch to be locked in the off position.

This protects the personnel and the vehicle from unauthorized start up.

The size of the bracket is 140mm x 80mm x 90mm.

All locking brackets are mainly stainless steel and are powder coated for identification.

All locking brackets are designed to fit switches without the removal of the switch and cables.

Once fitted it remains permanently in place and can only be locked in the OFF position.

For battery isolation use red (-01)

For starter isolation use yellow (-02)

Normally mounted through the panel so cables and switch is consealed behind the panel.Locksafe have some mounting options for this switch.

Switch rated at 2500 amps intermittant and 250 continous @24 volt DC.

LOCK SAFE电池隔离器装置LS13007-01系列型号

LOCK SAFE LS13001-01

LOCK SAFE LS13001-02

LOCK SAFE LS13005-01

LOCK SAFE LS13005-02

LOCK SAFE LS13009-01

LOCK SAFE LS13007-02

LOCK SAFE LS13007-01

LOCK SAFE LS13009-02

LOCK SAFE LS13011-01

LOCK SAFE LS13011-02

LOCK SAFE LS13011-03

LOCK SAFE LS13015-01

LOCK SAFE LS13025-01

LOCK SAFE LS13025-02

LOCK SAFE LS13030-01

LOCK SAFE LS13030-02