JOHNSON ELECTRIC风阀执行器M9116-AGA-2参数规格
JOHNSON ELECTRIC致力于创造一个安全、舒适和可持续发展的世界，100,000名员工倾力打造智慧建筑、高效能源解决方案和集成的基础设施配套，积极实践建设智慧城市和社区的承诺。JOHNSON ELECTRIC对可持续发展的关注，可追溯到1885年公司成立之初发明的室内电动恒温器。无论何时何地，JOHNSON ELECTRIC都承诺帮助客户取得成功，并通过战略性地专注于建筑领域，为各利益相关方创造更大的价值。
JOHNSON ELECTRIC风阀执行器M9116-AGA-2技术参数
|
M9116-AGA-2
|
|
SHORT DESCRIPTION
|
Floating, Electric Non-Spring Return, 140 lb-in, 6.5VA, 70 - 115 Seconds Rotation Time
|
|
APPLICATIONS
|
For Positioning Return Air or Exhaust Dampers, Controlling Face and Bypass Dampers, Positioning Blades for Variable Volume Fans, Positioning VF4000 and VF5000 Series Butterfly Valves, and Positioning VG1000 Series Ball Valves and VG7000 Series Globe Valve
|
|
FAIL SAFE
|
Non-Spring Return
|
|
CONNECTION
|
Electrical Connection: Screw Terminals for 22-14 AWG; Maximum of Two 18, 20, or 22 AWG per Terminal, Mechanical Connection: 3/8 - 3/4" (10 - 20mm) diameter Round Shaft or 3/8 - 5/8" (10 - 16mm) Square Shaft 1" (25.4mm) diameter Jackshaft With M9000-154 Co
|
|
DAMPER ACTUATOR TORQUE
|
140 lb-in
|
|
CONTROL TYPE
|
Floating
|
|
ENCLOSURE TYPE
|
NEMA 2
|
|
POWER RATING
|
12.5 VA
|
|
DIMENSIONS
|
2.68" x 4.2" x 6"
|
|
VOLTAGE
|
20 - 30 VAC, 24 VDC
|
|
FREQUENCY
|
50 - 400 Hz
|
|
AMPERAGE RATING
|
5 A
|
|
INCLUDES
|
Anti Rotation Bracket
|
|
USED WITH
|
Dampers and Valves
|
|
MOUNTING OPTIONS
|
Direct Mount
|
|
MAX TEMPERATURE
|
-4 to 122
|
JOHNSON ELECTRIC风阀执行器M91系列介绍
M91xx系列包括M9116，M9124和M9132。所有这些直接安装式电动执行器均使用24 V AC / DC电源供电。M91xx执行器可与开/关，浮动，比例或电阻控制器一起使用。这些双向执行器不需要阻尼器联动，可以轻松地安装在直径最大为3/4英寸（20毫米）的圆轴或最大直径为5/8英寸（16毫米）的方轴的阻尼器上。可以将它们直接或远程安装到风门上，或使用M9000-5xx阀联动套件之一安装到阀上。
单个M91xx型号可提供高达280磅·英寸（32牛·米）的扭矩。串联的两个-AGx，-GGx或-HGx型号提供两倍的扭矩或560 lb·in（64 N·m）。旋转角度可在0至90°的范围内以5度为增量进行机械调节。集成的辅助开关可用于指示终点位置或在所选旋转范围内的任何角度执行开关功能。位置反馈可通过开关，电位计或DC 0（2）至10 V信号获得。
The M91xx Series includes M9116, M9124, and M9132 models. All of these direct-mount electric actuators operate on AC/DC 24 V power. The M91xx actuators are available for use with on/off, floating, proportional, or resistive controllers. These bidirectional actuators do not require a damper linkage, and are easily installed on a damper with a round shaft up to a 3/4 in. (20 mm) in diameter or a square shaft up to 5/8 in. (16 mm).They may be direct or remote mounted to a damper, or mounted to a valve using one of the M9000-5xx Valve Linkage Kits.
A single M91xx model delivers up to 280 lb·in (32 N·m) of torque. Two -AGx, -GGx, or -HGx models in tandem deliver twice the torque or 560 lb·in (64 N·m). The angle of rotation is mechanically adjustable from 0 to 90° in.5-degree increments. Integral auxiliary switches are available to indicate end-stop position or to perform switching functions at any angle within the selected rotation range. Position feedback is available through switches, a potentiometer, or a DC 0(2) to 10 V signal.
JOHNSON ELECTRIC风阀执行器M9116系列其他常用型号：
JOHNSON ELECTRIC M9116-AGA-2
JOHNSON ELECTRIC M9116-AGC-2
JOHNSON ELECTRIC M9116-AGD-2
JOHNSON ELECTRIC M9116-AGE-2
JOHNSON ELECTRIC M9116-GGA-2
JOHNSON ELECTRIC M9116-GGC-2
JOHNSON ELECTRIC M9116-HGA-2
JOHNSON ELECTRIC M9116-HGC-2
JOHNSON ELECTRIC M9116-JGA-2
JOHNSON ELECTRIC M9116-JGC-2