REUTER-STOKES火焰追踪器RS-FS-9001技术参数

REUTER-STOKES设计和制造关键型任务测量设备，用于精确的辐射测量，加压和沸水反应堆监控，UV火焰检测以及用于定向钻井的井下传感器。

REUTER-STOKES总部位于美国，在其广泛的伽马和中子探测技术产品组合的设计，制造和安装方面提供了超过六十年的持续专业知识。REUTER-STOKES擅长于广泛的研究，开发和生产用于各种辐射监测应用的高质量探测器。

REUTER-STOKES产品有：

传感器

火焰传感器

工业网络安全

超声检查其

核仪器

校准仪器

REUTER-STOKES火焰追踪器RS-FS-9001技术参数

REUTER-STOKES火焰追踪器介绍

The Silicon Carbide (SiC) Flame Tracker dramatically improves  gas turbine performance while significantly reducing  maintenance requirements. Available for a variety of gas  turbines, the Flame Tracker flame sensor’s optical photodiode  is designed for use with multiple fuels, low NOx combustors  and steam injection. Reliable turbine operations for steam  injection applications require the sensitivity provided by  Flame Tracker.

Advantages

High sensitivity, fast response

Flame Tracker, with its SiC photodiode, has high sensitivity to  the longer UV wavelengths that easily penetrate the fog of fuel  and steam. This is advantageous over typical flame sensors  that are sensitive to only the short UV wavelengths. In addition,  the SiC sensor has an analog output with a very wide dynamic  range and rapid response time. These features offer the ability  to quickly—in less than 25 milliseconds—report flame status.  This means interruption-free service and improved  availability.

Reduced maintenance

The Flame Tracker flame sensor is equipped with quick  disconnect connectors, allowing sensor replacement time  to be reduced from hours to minutes. Its improved sensorcooling feature lowers the impact of surrounding heat and  extends the life of electronics.

Customized conversion kits

Customized flame sensor conversion kits are available for  all turbine configurations. These sensor enhancements  are mechanically and electrically interchangeable with  existing systems. The kit solution simplifies upgrading older,  maintenance-intensive systems to the superior performance  of the Flame Tracker.

Reliable, low voltage operation

Providing a 4–20 mA industry-standard output signal, the  Flame Tracker operates reliably with any fuel—with or without—  steam injection. Unlike older flame sensors that require high  voltage for operation, the Flame Tracker requires low voltage,  which eliminates special wiring and explosion-proof conduit  requirements.

Performance benefits

• Provides reliable operation when using any fuel

• Allows full operation during the water wash cycle

• Reduces maintenance time

• Operates on low voltage

• Provides rapid response to flameout

• Produces a wide dynamic range

• Customized conversion kits

• Meets all NFPA guidelines for flame detection on  gas turbines

• Delivers 10 times the sensitivity of tube-style sensors

碳化硅（SiC）火焰追踪器可显着改善燃气轮机性能，同时显着降低维护要求。 Flame Tracker火焰传感器的光学光电二极管可用于多种燃气轮机，设计用于多种燃料，低NOx燃烧器和蒸汽喷射。蒸汽喷射应用中涡轮的可靠运行需要Flame Tracker提供的灵敏度。

优点

高灵敏度，快速响应

带有SiC光电二极管的Flame Tracker对较长的UV波长具有高灵敏度，该波长很容易穿透燃料和蒸汽的雾气。相对于仅对短紫外线波长敏感的典型火焰传感器而言，这是有利的。此外，SiC传感器具有模拟输出，该模拟输出具有非常宽的动态范围和快速的响应时间。这些功能提供了在不到25毫秒的时间内快速报告火焰状态的功能。这意味着无中断服务和更高的可用性。

减少维护

Flame Tracker火焰传感器配备了快速断开连接器，可将传感器的更换时间从数小时缩短至数分钟。其改进的传感器冷却功能降低了周围热量的影响，并延长了电子设备的使用寿命。

定制的转换套件

定制的火焰传感器转换套件可用于所有涡轮机配置。这些传感器增强功能可以与现有系统在机械上和电气上互换。该套件解决方案简化了将旧的维护密集型系统升级到Flame Tracker的卓越性能的过程。

可靠的低压运行

火焰跟踪器提供4–20 mA工业标准输出信号，可在任何燃料（有或没有蒸汽喷射）的情况下可靠运行。与需要高电压才能运行的旧式火焰传感器不同，Flame Tracker需要低电压，这消除了特殊的布线和防爆导管的要求。

性能优势

•使用任何燃料时均可提供可靠的运行

•允许在水洗过程中完全运行

•减少维护时间

•低压运行

•快速响应熄火

•产生宽广的动态范围

•定制的转换套件

•符合有关燃气轮机火焰检测的所有NFPA准则

•灵敏度是管状传感器的10倍

REUTER-STOKES火焰追踪器其他常用型号：

REUTER-STOKES RS-FS-9004

REUTER-STOKES RS-FS-9001