SOLARTRON控制器SI3100技术规格及介绍

Solartron是高品质，高精度测量的代名词，其产品可用于整个工艺，能源和制造行业。

Solartron集团由三个针对特定细分市场的重点业务部门组成：

Solartron Analytical为物料分析部门提供服务

Solartron ISA专注于能源领域

Solartron Metrology专注于检测和质量控制领域

SOLARTRON控制器SI3100技术规格

Technical Specification
Product type	SI3100 - 2 Channel LVDT
Display type	Colour LCD display 40Hz update rate with 30º Viewing Angle
Display length (mm) Display length (inches)	XX.XXXXX X.XXXXXX
Resolution (µm)	Down to 0.05 µm or 0.000005”
Analogue Display	Colour Solid vertical bar
Transducer Excitation	LVDT
AC Primary Voltage (VAC rms)	3.0 V RMS
Primary Frequency (kHz)	5kHz or 10kHz
Signal Input (sensitivity range)	55mV to 500mV Full range
Input load resistance (k Ohm)	2k, 10k 100k
External input/output
Serial	RS232 serial port (for printer or PC).
Discrete Output	six isolated discrete outputs (Channel A, Lo, OK, HI), ( Channel B, Lo, OK, HI)
Analogue Output	2 Channels either configured 4-20mA or DC Voltage
Keypad	Membrane Keypad with 9 keys: Print, Zero, Up, Down Left, Right, Enter, Peak hold/Track, Menu.
Measurement configurations
Data Logging	Not available
Number of transducer inputs	1 or 2 (user selectable)
Measurement type	A, B, A+B, A-B, (A+B)/2, (A-B)/2, (B-A/a)
Indications	Measurement Mode, Type of measurement, Lower and Upper Limits, Measurement out of Limits
Electrical
Power supply (VDC)	+24 VDC +/- 10%
Mechanical and Enviromental
Mounting	Bench Top or Panel mount options
Sealing	Front Panel IP65, Case IP51, Rear Connectors IP51
Mass	1.1kg
Temperature	Operating temperature from 0°C to +50ºC storage between -20ºC to +85ºC
EMC	Immunity:EN6100-6-2:2001, Emissions: EN61000-6-3:2001
Dimensions	W x H x D(mm): 134 x 65 x 160 excluding bezel W x H x D(mm): 144 x 74 x 175 including bezel

SOLARTRON控制器SI3100产品介绍

新型SI3100控制器是一种仪器，旨在最大限度地提高Solartron Metrology广泛的 LVDT 测量探头和位移传感器的性能。该仪器具有直观的、菜单驱动的彩色显示屏，可以对其进行编程以设置限制或警报并记录其他参数。

SI3100由24Vdc电源供电，可用于显示一个或两个传感器读数，以及来自两个传感器的计算结果，例如，A、B、A+B、AB、(A+B/2)、(AB/2) , 和计算常数，例如角度测量。

通过受IP65保护的前键盘进行完整设置，如果需要，该键盘可以受密码保护。SI 3100还具有离散输入/输出和选择4-20mA或DC电压形式的模拟输出。

2 个 LVDT 输入

简单的菜单系统

单通道显示

7 位彩色显示屏（用户可选）

具有自动粗/细分辨率的模拟显示

输入/输出范围的自动显示颜色变化

峰值保持设施

每个传感器输入的离散 I/O

4-20mA或直流输出

RS232输出

前面板 IP 65 保护

The New SI3100 Controller is an instrument designed to maximise the performance of Solartron Metrology’s extensive range of LVDT Gauging Probes and Displacement Transducers. The instrument features an intuitive,menu-driven colour display which can be programmed to set limits or alarms and record other parameters.

Powered from a 24Vdc source, the SI3100 can be used to display one or two transducer readings, computed results from two transducers such as, A, B, A+B, A-B, (A+B/2), (A-B/2), and computations with constants, e.g. angle measurements.

Full set up is made via the IP65 protected front keypad that can, if required, be password protected. The SI 3100 also features discrete inputs/outputs and a selection of Analogue outputs in the form of 4-20mA or DC voltage.

2 LVDT inputs

Simple Menu System

Single channel Display

7 digit Colour Display (user selectable)

Analogue Display with auto coarse/fine resolution

Auto display colour change for in/out range

Peak hold facility

Discrete I/O for each transducer input

4-20mA or DC output

RS232 output

Front panel IP 65 protection

SOLARTRON控制器SI系列其他常用型号：