您的位置：网站首页 >> 行业新闻

新闻中心

行业新闻

热销产品

行业新闻

FRANKLIN ELECTRIC泵2366139020产品介绍

FRANKLIN电气成立于1944年，从一家小型电机制造公司发展成为完整水系统和加油系统供应商。富兰克林电美国，为各地提供设施。

FRANKLIN的主营业务有：

公用泵

抽水泵

电池备份系统

油传感单元

废水泵

污水泵

包装系统

磨床泵

冷凝水去除泵

蒸发式冷却器泵：CP系列

制冰机更换泵：RIM-U

FRANKLIN ELECTRIC泵2366139020产品参数

Construction Materials
Component	Standard Water Well	316 SS
Castings	Gray Iron	316 SS
Stator Shell	310 SS	316 SS
Stator Ends	Low Carbon Steel	316 SS
Shaft Extension	303 SS, Except 17-4 SS on 40 hp	17-4 SS
Fasteners	300 & 400 Series SS	316 SS
Seal Cover	304 SS & Sintered Bronze	316 SS
Seal	Carbon/Ceramic Face	Sand Fighter™ Seal System
Diaphragm	Nitrile Rubber	Nitrile Rubber
Diaphragm Plate	304 SS	316 SS
Diaphragm Spring	302 SS	17-7 SS
Slinger	Nitrile Rubber	Nitrile Rubber
Lead Wire (or Cable)	XLPE	XLPE
Lead Potting	Epoxy	Epoxy
Filter	Delrin & Polyester	316 SS Plug
Insulation	Class F	Class F

FRANKLIN ELECTRIC泵产品介绍及选型

Application Data:

These motors are built for dependable operation in 6-inch diameter or larger water wells. Temperature and time ratings are continuous in 86 °F (30 °C) water at 1/2 ft./sec. flow past the motor. Rotation: single-phase, CCW facing shaft end; three-phase, electrically reversible.

Basic Features:

Full 3450 RPM design point

Maximum temperature winding wire NEMA class 200

Anti-track self-healing resin system

Hermetically-sealed windings

Removable Water-Bloc™ lead

Double flange design

Stainless steel shell

Kingsbury-type water lubricated thrust bearing

Pressure equalizing diapragm

Sand slinger

3-lead & 6-lead (Wye Delta) configurations for 3-phase

Copper bar rotor

Special Features:

316 Stainless Steel: Special construction option for acid, low pH, and seawater applications. All 316 SS motors include a Subtrol-Plus heat sensor.

Sand Fighter™ models available for sandy wells. All Sand Fighter models include Subtrol-Plus heat sensor.

SUBMONITOR® OVERLOAD OPTION FOR THREE-PHASE MOTORS

A field proven and contractor friendly premium motor protection system. It protects the motor against overload, underload, excessive winding temperature and rapid cycling. It also extends the motor warranty to a full three years.* The motor must be manufactured with a Subtrol-Plus® heat sensor.

应用数据：

这些电机专为在直径为 6 英寸或更大的水井中可靠运行而设计。温度和时间额定值在 86 °F (30 °C) 水中以 1/2 英尺/秒的速度连续测量。流过电机。旋转：单相，逆时针面对轴端；三相，电气可逆。

基本特点：

全 3450 RPM 设计点

最高温度绕组线 NEMA 200 级

防履带自愈树脂系统

密封绕组

可拆卸 Water-Bloc™ 导线

双法兰设计

不锈钢外壳

金斯伯里型水润滑推力轴承

压力平衡膜片