DR. HÖNLE AG电源装置EPS60介绍及技术参数
Dr. Hönle AG是紫外线市场的供应商之一。Dr. Hönle AG高品质的产品广泛用于电子、微电子、精密工程、光学行业以及印刷、汽车、航天和制药行业的制造过程。
DR. HÖNLE AG电源装置EPS60技术参数
Technical Data
|
|
Maximum power output
|
7,2 kW
|
Mains supply
|
400 V – 480 V, 50/60 Hz
|
Power control
|
11 % - 100 % with analog
signal 1,1 V - 10 V DC
application depending
|
Potential free error signals
|
Total error
Lamp error
Earth fault
Phase loss
Over temperature
|
Output signals
|
UV ready
UV on
|
DR. HÖNLE AG电源装置介绍
The EPS 60 is an electronic power supply for UV discharge lamps with a maximum power of 2.0 kW to 7.2 kW. The EPS is ideal for doped lamps with an arc length of up to 500 mm and mercury lamps up to 680 mm.
Application example
Switch cabinet with 10 EPS: 10 x 2,0 to 7,2 kW
Features
The rectangular current output of the EPS causes an approximately 10% greater UV yield for the same electrical power compared to the sinusoidal power output of a conventional transformer/ choke ballast.
Additional features:
• Integrated ignitor
• Improved lamp reignition compared to conventional technology
• Compact design, approximately 50% smaller footprint for a 10-lamp-system
• Continuously variable power control, application dependent between 11% and 100%
EPS 60是用于紫外线放电灯的电子电源,最大功率为2.0 kW至7.2 kW。EPS 非常适合弧长高达500毫米的掺杂灯和高达680毫米的汞灯。
应用实例
带 10 个 EPS 的开关柜:10 x 2,0 至 7,2 kW
特征
与传统变压器/扼流器镇流器的正弦功率输出相比,EPS 的矩形电流输出在相同的电功率下产生约 10% 的紫外线输出。
附加的功能:
• 集成点火器
• 与传统技术相比,改进了灯重燃
• 紧凑型设计,10 灯系统的占地面积减少约 50%
• 连续可变的功率控制,在 11% 到 100% 之间取决于应用
DR. HÖNLE AG电源装置其他常用型号:
DR. HÖNLE AG EPS60
DR. HÖNLE AG EPSA80
DR. HÖNLE AG EPSA120
DR. HÖNLE AG EPSA240
DR. HÖNLE AG EPSA340